After adjustment, tighten the locking ring. Start the car engine and the device will turn on automatically and use the screen to adjust the shooting angle. Step 7: Install the dash cam and adjust the angleĬonnect the device on the mount and loosen the locking ring of the mount. Hide the wire inside the trim panel or use some cable clips to fix it on the panel.Īrrange the wire and place the excess wire under the carpet. Run the cable along the edge of the passenger seat until the charger is inserted into the 12 volt socket (cigarette lighter). Tuck the wires into the gap of the waterproof rubber. Do not across the airbag.Īlong the edge of the A-pillar, tuck the wires into the trim. Then hide the cable in the gap in front of the A-pillar. Gently remove the waterproof rubber strip on the side of the door and remove the A-pillar trim cover with a little force. Insert the power supply into the magnetic mount and hide the car power cable into the roof liner. If you use the adhesive mount, it is recommended to keep pressing for 30 seconds after pasting to ensure the complete attachment. Remove the protective film on the suction cup/Adhesive mount and attach the bracket on the static side film. If you want to use the adhesive mount to stick it on plastic or black dotted area, you can do it directly without the static side film. ![]() It cannot be pasted on black dotted area, plastic, or window defroster because the surface is not flat and smooth. Using this film can protect your windshield or tint, and it is also convenient to change the position or remove it in the future but remember that this film can only be pasted on the glass. If the location is oily, it can be wiped with cleaning fluid.Īfter cleaning, you can paste the static side film. ![]() But luckily, if you insist to put it right here, you can still use the adhesive mount to stick directly on this area.Īfter selecting the installation spot, use a wiping cloth to clean the location to be attached. Because the surface is not flat and smooth, the suction cup and the static side film will not be able to absorb or attach in this area and avoid choosing the edge of the black dotted area. In addition, do not choose the black dotted area to use the suction cup mount and static side film. It is recommended to install it behind the rearview mirror for blocking the driving view. When the car power cable is plugged in, watch the screen, and find a location to be installed. Plug in the dash cam first to confirm whether the device can work properly.Ĭonnect the magnetic mount to the device and start the engine. Let us do it together!ĭash Cam / Car Power Cable / Suction Cup Mount / Adhesive Mount / Static Side Film / Cable Clips / Cleaning Liquid / Wipe Today, we will show you how easy to install a dash cam in 7 simple steps! Easy installation with excellent quality. Do you feel frustrated and have no idea how to deal with the installation and hide its cable? This article can help save you extra money without going to an installer. ![]() It is also an especially important thing to replace the old low-quality dash cam in a timely manner. Dash cams have now become a must-have product for every car.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |